LMS: PPS Training

Skip to main content

Course categories:

Page: 1 2 3 (Next)

PPS 1.01 Dimpling Aluminum Alloys - Issue 14 (Self-Training & Quiz)

PPS 1.02 Forming Aluminum Alloys - Issue 16 (Self-Training & Quiz)

PPS 1.04 Modified Radius Dimpling Equipment - Issue 17 (Self-Training)

PPS 1.04 Modified Radius Dimpling Equipment Quiz

PPS 1.05 Ram Coin Dimpling Equipment - Issue 18 (Self-Training)

PPS 1.07 Dimpling Ferrous, Nickel and Titanium Alloys - Issue 8 (Self-Training)

PPS 1.08 Magnetic Pulse Forming of End Fittings - Issue 19 (PSD 1.08-2, Issue 3) Self-Training & Quiz

PPS 1.09 Drilling and Reaming - Issue 31 (Self-Training)

PPS 1.12 Use of Rivet Squeezers (Portable and Stationary) - Issue 6 (Self-Training)

PPS 1.14 Use of Pneumatic Rivet Guns - Issue 6 (Self-Training)

PPS 1.21 Machining Processes for Metallic Parts - Issue 3 (Self-Training)

PPS 1.31 Drill/Countersink for Flush Head Fasteners - Issue 5 (Self-Training)

PPS 1.33 Countersinking for Flush Head Fasteners - Issue 5 (Self-Training)

PPS 1.34 Magnetic Pulse Forming of Tubes - Expansion and Compression - Issue 7 (Self-Training & Quiz)

PPS 1.47 Set-Up and Operation of Hand Routers - Issue 4 (Self-Training)

PPS 1.48 Set-Up and Operation of Rivet Shavers - Issue 3 (Self-Training)

PPS 2.01 Installation of Solid Rivets - Issue 32 (Self-Training)

PPS 2.02 Installation of Cherry Rivets - Issue 17 (Self-Training)

PPS 2.05 Installation of Rivnuts - Issue 10 (Self-Training)

PPS 2.06 Riveting Connection Links on Chains - Issue 10 (Self-Training)

PPS 2.07 Installation of Jo-Bolts - Issue 19 (Self-Training)

PPS 2.08 Installation of Blind Type, Electrical Bonding and Grounding Terminal Studs - Issue 7 (Self-Training)

PPS 2.11 Installation of Self-Retaining Nuts and Studs - Issue 9 (Self-Training)

PPS 2.12 Installation of Heli-Coil Screw Thread Inserts - Issue 12 (Self-Training)

PPS 2.13 Installation of Standard Dzus Fasteners - Issue 7 (Self-Training & Quiz)

PPS 2.15 Installation of Panel Fasteners - Issue 7 (Self-Training)

PPS 2.16 Installation of NAS Type Lockbolt Fasteners - Issue 21 (Self-Training & Quiz)

PPS 2.17 Installation of Anchor Nuts - Issue 26 (Self-Training)

PPS 2.18 Installation of Roll Pins - Issue 5 (Self-Training)

PPS 2.19 Installation of Self Tapping and Drive Screws - Issue 4 (Self-Training)

PPS 2.20 Installation of Bolts and Screws - Issue 21 (Self-Training)

PPS 2.21 Installation of Snapslide Fasteners - Issue 5 (Self-Training)

PPS 2.22 Installation of Quick Release Fastener Assemblies - Issue 13 (Self-Training)

PPS 2.26 Removal and Replacement of Jacketed (Pastushin) Rivets - Issue 12 (Self-Training)

PPS 2.27 Installation of Lee Plugs and Jets - Issue 10 (Self-Training)

PPS 2.63 Installation of Nut Plate Blind Rivets - Issue 10 (Self-Training)

PPS 2.64 Installation of Potting Type Sandwich Panel Fasteners - Issue 14 (Self-Training & Quiz

PPS 2.66 Installation of Blind Rivets - Issue 16 (Self-Training)

PPS 2.67 Installation of Hi-Lok / Hi-Tigue Fasteners - Issue 18 (Self-Training)

PPS 2.68 Installation of Hi-Lite Fasteners - Issue 22 (Self-Training)

PPS 2.70 Installation of Click Bond Adhesive Bonded Fasteners, Tie Mounts and Patches - Issue 10 (Self-Training)

PPS 2.71 Installation of Pull Type Hi-Lite ST Fasteners - Issue 9 (Self-Training)

PPS 3.02 Swaging Straight Shank Terminals - Issue 26 (PSD 3.02-1 Issue 1) Self-Training

PPS 3.03 Nylon Cord Splicing - Issue 4 (Self-Training)

PPS 3.04 Swaging of Ball Terminals - Issue 20 (PSD 3.04-1 Issue 1) Self-Training & Quiz

PPS 3.05 Proof Loading Cable and Chain Assemblies - Issue 16 (Self-Training & Quiz)

PPS 3.07 Installation of Ferrules on Elastic Cord - Issue 8 (Self-Training)

PPS 3.08 Fabrication of Steel Cable Assemblies Using Nicopress Sleeves - Issue 9 (Self-Training)

PPS 3.10 Brazing of Terminals to Steel Cables - Issue 11 (Self-Training)

PPS 4.19 Cleaning of Fuel Tanks - Issue 8 (Self-Training)

PPS 6.01 Fabrication of Rigid Fluid Lines - Issue 26 (PSD 6.01-7, Issue 2) Self-Training

PPS 6.03 Installation of Fluid Lines and Fittings - Issue 38 (PPS PSD 6.03-1 - Issue 1) Self-Training

PPS 6.04 Identification of Fluid System Lines - Issue 18 (Self-Training)

PPS 6.05 Closure of Fluid Lines and Fluid System Components - Issue 16 (PSD 6.05-2, Issue 1) Self-Training

PPS 6.10 Cleaning of Fluid System Components - Issue 22 (PSD 6.10-4, Issue 3) Self-Training & Quiz

PPS 6.12 Pressure Testing Hydraulic Components Fuel and Bleed Air Lines - Issue 17 (Self-Training)

PPS 6.14 Swage Installation of Wiggins and Hydraflow Fittings - Issue 19 (PSD 6.14-3, Issue 1) Self-Training & Quiz

PPS 6.18 Certification of Tooling used for Installation of Externally Swaged (Permaswage Type) Fittings - Issue 10 (Self-Training)

PPS 6.23 Installation of Cryoflare Sleeves / Nuts Quiz

PPS 6.23 Installation of Cryoflare Sleeves/Nuts - Issue 6 (Self-Training)

Page: 1 2 3 (Next)